|
Posted by Mike on March 2, 2007, 1:20 am
> Its much easier to do m.c.u./cpu
> with ARM 144 pin .
> But the adverts say you MUST get
> a bloat I.D.E. and then C++ , to
> write the software ....
> Common sense and some hands on
> will create a faster programming method .
> I fell for SamBa , 20 mega bytes of
> bloat and it did not even work !
> All it does is send a file to Flash
> and it refused my
> ATMEL AT91SAM7S256 ! And its on
> the list !! Garbage !!
> --------------
> I have a tiny 35KB , editor from
> Steve Hutchison , Sydney .
> QEDIT.EXE .
> I'll create an assembler and "Flasher"
> for my many ARM7 cpu's .
> But it will also do a list . i'll put the
> addresses and setups and comments
> in this "text" file , then process it with
> macros , then send it to ARM7 for
> testing .
> Its easier when you create it yourself .
> Is there any one doin same ARM7
> stuff here ?
> BTW i got 10 Ninetendo DS Lites
> for Roboting , cause they have
> ARM7 and 9 and 2 color LCD's
> and a touch screen and a very hi
> quality Lit-ion battery and WiFi ,
> 802.11b , but low powered , only
> good for 100 ft line of sight .
> I also got BW CCD analog cameras
> i'll be putting mirrors on and spinning the
> mirrors . I'll need many ARM7's to
> analyse the scan lines .
> Wow . Robotics is fun , especially
> if ya can do better than Honda ,
> at 1/10 the cost .
> Thats what im trying to do .
> Anyone interested ?
Do you actually read what you write? Are you on drugs, or is this more
of just a stream of consciousness?
If you couldn't get SAM-BA to work, either your hardware is flawed or
you are. SAM-BA works great, and has been proven countless times by
countless people. I used to use it on my SAM7X boards, but I have
since switched to using a AT91SAM-ICE.
Seek help. Immediately.
-Mike
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map
> with ARM 144 pin .
> But the adverts say you MUST get
> a bloat I.D.E. and then C++ , to
> write the software ....
> Common sense and some hands on
> will create a faster programming method .
> I fell for SamBa , 20 mega bytes of
> bloat and it did not even work !
> All it does is send a file to Flash
> and it refused my
> ATMEL AT91SAM7S256 ! And its on
> the list !! Garbage !!
> --------------
> I have a tiny 35KB , editor from
> Steve Hutchison , Sydney .
> QEDIT.EXE .
> I'll create an assembler and "Flasher"
> for my many ARM7 cpu's .
> But it will also do a list . i'll put the
> addresses and setups and comments
> in this "text" file , then process it with
> macros , then send it to ARM7 for
> testing .
> Its easier when you create it yourself .
> Is there any one doin same ARM7
> stuff here ?
> BTW i got 10 Ninetendo DS Lites
> for Roboting , cause they have
> ARM7 and 9 and 2 color LCD's
> and a touch screen and a very hi
> quality Lit-ion battery and WiFi ,
> 802.11b , but low powered , only
> good for 100 ft line of sight .
> I also got BW CCD analog cameras
> i'll be putting mirrors on and spinning the
> mirrors . I'll need many ARM7's to
> analyse the scan lines .
> Wow . Robotics is fun , especially
> if ya can do better than Honda ,
> at 1/10 the cost .
> Thats what im trying to do .
> Anyone interested ?