|
Posted by Dennis on February 26, 2006, 10:05 am
Decode all the characters on the Sony remote. Find a unique character that's
not on the remote. Transmit the unique character from your IR LED (used to
detect objects)with some time between the character being sent and when
receiving and decoding characters use that character as an object detected
condition. You will still need to deal with receiving the remote and
detecting the object at the same time but this will allow the receiver to
identify the signal being detected as an object or a command.
Hope this helps,
Dennis
www.dseoutdoors.com
>I am planning to build a robot that uses a Sharp GP2D120 for IR object
> detection.
> I would also like to control it using a VCR remote control and the Sony
> IR protocol.
> Is there any way of doing this without the IR signal from the remote
> control causing the GP2D120 to think it's detected an object?
> Any feedback will be appreciated.
> Thank you.
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map
> detection.
> I would also like to control it using a VCR remote control and the Sony
> IR protocol.
> Is there any way of doing this without the IR signal from the remote
> control causing the GP2D120 to think it's detected an object?
> Any feedback will be appreciated.
> Thank you.
>