IR Distance Sensor

General Robotics Forum - All aspects of robots and their applications. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
IR Distance Sensor garethrichardadams 06-16-2008
  `--> Re: IR Distance Sensor garethrichardadams06-16-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on June 16, 2008, 11:02 am
Hi all,

I know this has been covered before and the conclusion was to use a
sharp IR sensor...but! I don't need an accurate distance, I just want
a relative distance - moving closer, moving further away...

I've found this circuit which is supposedly for the Roland D-Beam
controller (a controller on a musical keyboard that senses the
distance to your hand and adjusts something accordingly).
http://members.tripod.com/urekarm/synth/maebd.pdf

It appears to just use an ir led and phototransistor. Is the rest of
the circuit just the correct band pass filter?

Are there any other circuits out there similar to this?

Thanks

Gareth

Posted by Peter Harrison on June 16, 2008, 2:33 pm
garethrichardadams@hotmail.com wrote:
> Hi all,
>
> I know this has been covered before and the conclusion was to use a
> sharp IR sensor...but! I don't need an accurate distance, I just want
> a relative distance - moving closer, moving further away...
>
> I've found this circuit which is supposedly for the Roland D-Beam
> controller (a controller on a musical keyboard that senses the
> distance to your hand and adjusts something accordingly).
> http://members.tripod.com/urekarm/synth/maebd.pdf
>
> It appears to just use an ir led and phototransistor. Is the rest of
> the circuit just the correct band pass filter?
>
> Are there any other circuits out there similar to this?
>
> Thanks
>
> Gareth

Over what physical range would you want this to work?
How small a target do you want to detect?
What are the ambient lighting conditions going to be like?

The Roland circuit has the detector AC coupled so that, within some
limits, ambient lighting will not affect the output too much.
Presumably, there is some kind of amplitude detector after that.

My micromouse sensors work over a range of 3cm to 15cm or so and could
be used at different ranges with care. They are very simple.

Try here for a start:

http://www.micromouseonline.com/content/view/60/58/

Pete Harrison

Posted by on June 16, 2008, 4:04 pm
> Over what physical range would you want this to work?
> How small a target do you want to detect?
> What are the ambient lighting conditions going to be like?
Ideally, the range would be about 5 - 30 cm.

The target will be a hand.

Ambient light conditions will be indoors, but could be flourescent
light

They look like they might do the job - thanks!

Gareth


The site map in XML format XML site map
other useful resources:
Official Robosapien Website
Lego Mindstorms Website

Contact Us | Privacy Policy